Rated Capacity
30-ton lifting capacity for compatible heavy-duty service and maintenance applications.
Price Drop ends Dec 6
Accident and warranty protection by Xcotton (partner with AIG)
This 30-ton air hydraulic floor jack combines pneumatic lifting with dependable manual hydraulic operation. Its reinforced steel structure, low-profile saddle, adjustable handle, and large rubber wheels provide practical support for compatible truck, trailer, tractor, and workshop lifting tasks.
30-ton lifting capacity for compatible heavy-duty service and maintenance applications.
Low-profile access helps position the jack beneath compatible vehicles with limited clearance.
Connect to a compatible air compressor for efficient pneumatic lifting in the workshop.
The long handle adjusts from 90° to 180° for practical operation in different work areas.
A low-profile lifting design, four saddle adapters, an adjustable operating handle, and large rubber wheels help the jack adapt to a range of compatible service tasks.
Includes 20 mm, 25 mm, 60 mm, and 100 mm adapters for compatible lifting positions.
The low saddle height supports access beneath compatible vehicles where clearance is limited.
Large rubber tires help move the jack across compatible workshop floors and service areas.
The 46-inch handle pivots through a wide angle for practical leverage and positioning.
The jack pairs a 9-inch minimum saddle height with a maximum saddle height of approximately 17-11/16 inches, giving compatible vehicles useful lifting range for maintenance and service work.
Supports compatible loads up to 66,000 lb when used within verified equipment ratings.
Helps reach compatible lifting points with lower underbody clearance.
Multiple extension sizes provide added setup flexibility for compatible applications.
Provides practical mobility when repositioning the jack around the work area.
A hydraulic jack is intended to raise a compatible vehicle, not to support it during service. Follow the vehicle manufacturer's lifting instructions and always use correctly rated jack stands before working beneath a vehicle.
Never exceed the lowest-rated component, including the jack, adapters, lifting points, and support equipment.
Operate only on firm, level ground that can safely support the vehicle and lifting equipment.
Check the saddle, hydraulic system, wheels, handle, and air connection for damage or leaks.
After lifting, place correctly rated jack stands at approved support points before any service work.
Reliable lifting support for compatible truck maintenance.
A practical tool for compatible wheel and undercarriage work.
Ideal for compatible tractors and utility equipment.
Designed to support demanding daily service routines.
| Brand | GARVEE |
|---|---|
| Product Type | Air Hydraulic Floor Jack |
| Material | Steel |
| Color | Red |
| Load Capacity | 30 Ton / 66,000 lb |
| Minimum Saddle Height | Approximately 9 in without adapter |
| Maximum Saddle Height | Approximately 17-11/16 in |
| Handle Length | Approximately 46 in |
| Handle Adjustment Range | 90° to 180° |
| Wheel Diameter | Approximately 8 in |
| Operating Air Pressure | 90–145 PSI |
| Recommended Air Compressor | 3 HP or compatible equivalent |
| Saddle Extension Adapters | 20 mm, 25 mm, 60 mm, and 100 mm |
| Automotive Fit Type | Universal Fit for Compatible Vehicles |
| Item Weight | Approximately 79.4 lb |
Bring together 30-ton capacity, air-assisted hydraulic lifting, adaptable saddle extensions, and mobile workshop handling in one heavy-duty floor jack.

Price Drop ends Dec 6
This 30-ton air hydraulic floor jack combines pneumatic lifting with dependable manual hydraulic operation. Its reinforced steel structure, low-profile saddle, adjustable handle, and large rubber wheels provide practical support for compatible truck, trailer, tractor, and workshop lifting tasks.
30-ton lifting capacity for compatible heavy-duty service and maintenance applications.
Low-profile access helps position the jack beneath compatible vehicles with limited clearance.
Connect to a compatible air compressor for efficient pneumatic lifting in the workshop.
The long handle adjusts from 90° to 180° for practical operation in different work areas.
A low-profile lifting design, four saddle adapters, an adjustable operating handle, and large rubber wheels help the jack adapt to a range of compatible service tasks.
Includes 20 mm, 25 mm, 60 mm, and 100 mm adapters for compatible lifting positions.
The low saddle height supports access beneath compatible vehicles where clearance is limited.
Large rubber tires help move the jack across compatible workshop floors and service areas.
The 46-inch handle pivots through a wide angle for practical leverage and positioning.
The jack pairs a 9-inch minimum saddle height with a maximum saddle height of approximately 17-11/16 inches, giving compatible vehicles useful lifting range for maintenance and service work.
Supports compatible loads up to 66,000 lb when used within verified equipment ratings.
Helps reach compatible lifting points with lower underbody clearance.
Multiple extension sizes provide added setup flexibility for compatible applications.
Provides practical mobility when repositioning the jack around the work area.
A hydraulic jack is intended to raise a compatible vehicle, not to support it during service. Follow the vehicle manufacturer's lifting instructions and always use correctly rated jack stands before working beneath a vehicle.
Never exceed the lowest-rated component, including the jack, adapters, lifting points, and support equipment.
Operate only on firm, level ground that can safely support the vehicle and lifting equipment.
Check the saddle, hydraulic system, wheels, handle, and air connection for damage or leaks.
After lifting, place correctly rated jack stands at approved support points before any service work.
Reliable lifting support for compatible truck maintenance.
A practical tool for compatible wheel and undercarriage work.
Ideal for compatible tractors and utility equipment.
Designed to support demanding daily service routines.
| Brand | GARVEE |
|---|---|
| Product Type | Air Hydraulic Floor Jack |
| Material | Steel |
| Color | Red |
| Load Capacity | 30 Ton / 66,000 lb |
| Minimum Saddle Height | Approximately 9 in without adapter |
| Maximum Saddle Height | Approximately 17-11/16 in |
| Handle Length | Approximately 46 in |
| Handle Adjustment Range | 90° to 180° |
| Wheel Diameter | Approximately 8 in |
| Operating Air Pressure | 90–145 PSI |
| Recommended Air Compressor | 3 HP or compatible equivalent |
| Saddle Extension Adapters | 20 mm, 25 mm, 60 mm, and 100 mm |
| Automotive Fit Type | Universal Fit for Compatible Vehicles |
| Item Weight | Approximately 79.4 lb |
Bring together 30-ton capacity, air-assisted hydraulic lifting, adaptable saddle extensions, and mobile workshop handling in one heavy-duty floor jack.
Accident and warranty protection by Xcotton (partner with AIG)

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 1

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6

Ends in Dec 6