GARVEE Hand Pump & Hose Oil Drain Pan with 15 Gal Low Profile & 8 Ft Hose - Sliver

I'm very happy with this oil drain pan. I really like the large 17 gallon capacity. I can actually accomplished 2 complete oil changes with this before I need to drain it. The large caster wheels help position this extremely easy as it rolls with ease. I love that it has a longer handle on it so you can position it under the car with no problem whatsoever if you need to adjust it from left to right, front to back. I must note that this is definitely not for cars unless they are on car ramps or jacked up as it sits about 8 inches off the ground so it will not just roll under a car without hitting it. But that being said it'll work great on SUVs and pick up trucks, and they won't need any lifting whatsoever. Some assembly was required. It was relatively easy. It has an instruction manual that is pretty good, although it doesn't walk you through step-by-step how to put it together, It gives you enough of a hint. The hand pump on this is great. It primes very easily and pushes fluid very quickly. I like that this has a metal grate on top of it that can catch any drain plug that you drop so it does not go down into the oil in the drain pan. I think this is good value for the money and I recommend it.

This is a really nice drain pan. I gave it 5 star, only complaint I have is that during assembly, they glued the fittings and while putting together I broke a 1/2 90 and hose nip. When you assemble just install on pump prior to bolting to tank.. Pump works nicely !

If you deal with heavy equipment, big rigs, or anything that has a lot of fluid in it that you are about to drain and refill, this is what you want.This fluid catcher has everything you want and need in such a piece of equipment.It’s got wheels and a handle pull it, which makes it easy to move around and slide under under equipment and so on.It’s got a pump and long 8 foot hose. It’s low profile and sneaks right in to tight places.It’s got a 17 gallon capacity, which is amazing and also necessary for equipment and machinery.This is a beast when it comes to fluid replacement in high quantities. I highly recommend it.

It was my first time and I went from spills everywhere to little accidents from moving filers etc

Lightweight with a large fluid capacity. There is a drain grate to keep parts from falling down into the oil. The pump moves old oil out faster then I expected. Oil cart rolls easy full or empty. Cart is especially nice when doing transmission pan filter work. I would recommend.

I am a DIY mechanic on a few of my projects at home and frequently change oil on most of my vehicles this is a significant upgrade from putting a bucket underneath my truck, nice crawling wheels that help you slide it underneath, nice screen on top, nice pump system I'll update my review in the springtime when I have more usage of it...

Was very interested in this item. It looked pretty interesting to have a pump and huge capacity to store oil. Would have been way better then the few oil pans that I have and spilling when transferring from oil container to empty oil bottle for transfer to the auto store for disposal.

I have to say it does work pretty well. The package came delivered looking very rough! But it was all right.

This is an interesting unit. Not quite what you would want for a vehicle on a lift and too tall to just run under a typical car; the best use case is for a ramp or Quick Jack set up for fluid changes. I use both of these and found the quality of the unit high - though the pump is a typical inexpensive fluid pump, and I am wondering how it would hold up to gear oil. It is convenient to maneuver, and draining into bottles or other recycling containers is cleaner than pouring a typical drain pan. A good choice for the serious DIY'er.

They supply you with a lot of teflon plumbing tape and if you use their fittings you'll need it. I like my fittings to snug up without tape so I purchased some fitting were one of the reviewers said they tightend up after 1 thread and it worked. The new fittings snugged up about 1/2 way in. I was able to use minimal teflon tape to seal the fittings. You need 3/4 pipe threads for one end and 3/4 barb fitting for the other if you want to do it like I did. Everything else went together fine It does feel like a cheap chinese build quality, I figure I could reinforce whatever breaks when needed. I think I'll get some life out of this without leaks because of how I built mine.